Enviro Products

Approx. Rs 55,000 / PieceGet Latest Price

Approx. Rs 50,000 / PieceGet Latest Price

Being an eminent organization in the industry, we are involved in providing a premium quality range of BOD Incubator.

Technical Specifications:

• Double walled cabinet mounted on castor wheels
• Full Length inner acrylic door permit inspection of specimens without disturbing the Temp
• Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch
• CFC Free hermetically sealed compressor provide temp.
• Air circulation fan for maintain Temp. Uniformity throughout the chamber
• Flush fitting insulated double walled door
• The Chamber is provided with modular removable shelves made of SS
• For complete flexibility in use to work on 230 volts 50 Hz

Safety Features:

• Built in Temp Deviation Audio visual alarm
• Safety thermostat for overshoot Temp. Cut off system
• HRC Fuses for compressor heater & mains
• Time daily circuit for safety of compressor.

Special Care: A suitable K V. A. Servo stabilizer is strongly recommended.

This BOD Incubator is available in below sizes:

Approx. Rs 20,000 / NumberGet Latest Price

Approx. Rs 6,500 / PieceGet Latest Price

Additional Information:

Approx. Rs 28,000 / PieceGet Latest Price

• For two stirrers.
• For four stirrers.
• For six stirrers.

• Timer 0-60 minutes, extra.
• Speed revolution counter extra to cost. (Mechanical)
• Microprocessor based Digital Speed Meter.
• Attachment for feeding dose to all the stirring unit simultaneously.
• For 2 stirrer jar test.
• For 4 stirrer jar test.
• For 6 stirrer jar test.
• High speed jar test apparatus from 10 to 200 RPM.
• Complete body stainless steel for 2 stirrer
• Complete body stainless steel for 4 stirrer
• Complete body stainless steel for 6 stirrer

Approx. Rs 3,900 / NumberGet Latest Price

Riding on unfathomable volumes of industrial expertise, we are providing a broad array of Imhoff Cone.

• Fine finish
• Durability
• Accurate measuring

Additional Information:

Approx. Rs 500 / NumberGet Latest Price

This is a digital TDS meter tester used for measuring Total Dissolved Solids present in the water. To measure the purity of water, please use the following instructions.

Operating Instructions:

Taking TDS Measurements

1. Remove the protective cap.
2. Turn the TDS meter on. The ON/OFF switch is located on the panel.
3. Immerse the meter into the water/solution up to the maximum immersion level (2 inch).
4. Lightly stir the meter to dislodge any air bubbles.
5. Wait until the display stabilizes. Once the reading stabilizes (approx. 10 seconds), press the HOLD button to view the reading out of the water.
6. If the meter displays a flashing x10 symbol, multiply the reading by 10.
7. After usage, shake off any excess water from your meter. Replace the cap.

Taking Temperature Measurements

1. Once the meter is on, the temperature function can be used at any time, in or out of liquid.
2. Press the TEMP button. The display will switch to temperature (in Celsius only).
3. To return to TDS mode, press the TEMP button.

Additional Information: