D M Instruments

KATHWADA, Ahmedabad, Gujarat

GST No. 24AWPPP7720F1ZB

Send Email
0804896328286% Response Rate
Search

Home » Our Products » Petroleum Product Testing


Petroleum Product Testing

Offering you a complete choice of products which include flash & fire point apparatus, hydrometer jar bath, water separability test apparatus, drop point apparatus, petroleum testing instruments and rust prevention test apparatus.

Flash & Fire Point Apparatus

REQUEST CALLBACK

Flash & Fire Point Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / NumberGet Latest Price

Product Details:
Minimum Order Quantity1 Number
Usage/ApplicationPETROLEUM LABORATORY
Model Name/NumberDM-707P
ShapeSquare
Frequency50Hz
BrandDM
MaterialMild Steel
Voltage230 V
Thermometer IP28C Range -6 to +400C

This apparatus is used for determination of Flash Point & Fire Point of Petroleum products except fuel oil with open flash 800C as per specification IP 36/57, IS 1448 (P:69) 1969 and ASTM-D-92-67.

General Description & Specification: 
The apparatus consists of a cup, heating plate, thermometer clip and test flame attachment with swivel joint for passing over liquid surface in the prescribed manner, heater is controlled by means of Energy Regulator for operation on 230 volts, 50Hz, AC single phase.


Optional Accesories:

  • Cleaveland Flash Point Apparatus electric heated with voltage carriac copper coil type.
  • Polished carrying wood case.
  • Spare cup with handle only.
Yes! I am Interested

Hydrometer Jar Bath

REQUEST CALLBACK

Hydrometer Jar Bath
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 20,000 / NumberGet Latest Price

Product Details:
Minimum Order Quantity1 Number
Usage/ApplicationDENSITY TESTING
Voltage230V
BrandDM
MaterialS.S/M.S
Model Name/NumberDM -105
ShapeRectangular
CapacityAS PER NUMBER OF HYDROMETER
Temperature Range40 TO 100C
Automation GradeAutomatic

The Humboldt Hydrometer Water Bath is designed to provide a 68°F (20°C) ambient temperature throughout the unit by using a microprocessor-based temperature control with integral heater and chiller. The control processor in the H-4239A provides a consistent bath temperature of 68°F (20°C) accurate to within 0.1% of input span ±1°F. Temperature range can be set between 50°F (10°C) and 120°F (49°C).

The H-4239A water bath is fully-insulated and includes a circulating pump, which ensures a constant water temperature throughout bath. While the Humboldt Hydrometer Jar Water Bath can be used for many uses within labs, it was .

designed specifically for use in providing a consistent temperature bath for storing hydrometer jars in accordance with ASTM D422, AASHTO T88 and UNE 103.102 to determine the particle size distribution of very fine materials, such as silt and clay. The H-4239A can accommodate (8) hydrometer jars at a time. All models include a stainless steel shelf, which supports specimens while allowing 2″ of free circulating water above and below specimens.
with glass Holding clamp.

  • Heating bath 40c to 95c -20000 with 02 -Hydrometer jar holding.(Only heating)

 

  • Heating bath 5c to 95c -45000 with 02 -Hydrometer jar holding.(with cooling arrengements)

 

Yes! I am Interested

Water Separability Test Apparatus

REQUEST CALLBACK

Water Separability Test Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 90,000 / PieceGet Latest Price

Product Details:
Type Of Testing MachinesOIL TESTING
Usage/ApplicationPETROLEUM TESTING
ColorWhite
SizeBATH SIZE
Power Supply230V
Digital Timer And CounterDIGITAL AN COUNTER
Micro Controller BasedYES
ResettableYES
Surface FinishingYES
BrandDM

Test Method

The ability of a lubricating oil to separate from water and resist emulsification is an important performance characteristic for applications involving water contamination and turbulence. Water separability is determined by stirring equal volumes of water and sample together at a controlled temperature to form an emulsion and observing the time required for separation of the emulsion to occur. This method is suitable for petroleum oils and synthetic fluids

 


Yes! I am Interested

Drop Point Apparatus

REQUEST CALLBACK

Drop Point Apparatus
  • Drop Point Apparatus
  • Drop Point Apparatus
  • Drop Point Apparatus
  • +3 Drop Point Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 55,000 / NumberGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Number
BrandDM
Voltage230V
Power1 KW
External Diameter16 MM
Size6 HOLE
Temperature400 C MAXIMUM
TypeLABORATORY

Technical specification:
  • As per ASTM D2265
  • Grease testing Laboratory
  • Sample test : 06 nos
  • Temp: 50C TO 400C
  • All Dimension As per - ASTM D 2265
  • Aluminium Heating Block use with 6 hole as per ASTM
  • with Glass window and Light facality .
  • with all Accessries .

Additional Information:

  • Production Capacity: 1 NOS
  • Delivery Time: 2 WWEK
  • Yes! I am Interested

    Petroleum Testing Instruments

    REQUEST CALLBACK

    Petroleum Testing Instruments
    • Petroleum Testing Instruments
    • Petroleum Testing Instruments
    • Petroleum Testing Instruments
    • Petroleum Testing Instruments
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 15,000 / NumberGet Latest Price

    Product Details:
    MaterialStainless Steel
    Insulation WallDouble Wall
    Model Name/NumberDM 103
    Usage/ApplicationLaboratory
    Type Of Testing MachinesSAMPLE
    ColorDA GRAY
    Packaging TypeWooden Box
    Display TypeDigital
    Load CapacitySINGLE PHASE
    Automation GradeSemi-automatic
    BrandDM
    Voltage230 V
    Power1 KW
    GradeAutomatic, Manual
    SupplyAC
    Frequency50HZ
    Phase230V

    PETROLIUME DISTILATION
    WITH GLASS WARE WITH STAND


    Yes! I am Interested

    Rust Prevention Test Apparatus

    REQUEST CALLBACK

    Rust Prevention Test Apparatus
    • Rust Prevention Test Apparatus
    • Rust Prevention Test Apparatus
    • Rust Prevention Test Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 85,000 / NumberGet Latest Price

    Product Details:
    Insulation WallDouble Wall
    MaterialStainless Steel
    Usage/ApplicationPETROLIUME LABORATORY
    Automation GradeAutomatic
    Power Supply2 KW
    Voltage230V
    PowerElectronic
    FeaturesTemperature controlling
    Temperature Control+- 1deg C
    UsagePETROLIUME LABORATORY

    Compliance  ASTM D665, D3603
    • Oil bath -2/4/6 Sample Holding.
    • Oil bath Material-Inner s.s /Outer M.S.
    • Digital Temp.Controller wirh Stirrer .
    • Temp.Range -Ambient+5 to120C
    • With 2/4/6  Stirrrer Sample Speed -1000 Rpm/Min(50+_)
    • Voltage 110/120V, 60Hz 200/240 Volt, 50/ 60 Hz
    • ADDITIONAL INFORMATION The 31 litre capacity oil bath has a temperature range of ambient +5°C to 120°C, and is controlled by a remote digital thermostir unit to within ±0.1°C @ 65°C. The top panel of the bath accepts up to 7 test beakers. Each beaker is stirred at 1000 ±50 rev/min by a quick release paddle stirrer. The test specimen, mounted in a holder (acrylic for normal oils, PTFE for synthetic fluids) is immersed in the test fluid in the beaker and supported by the beaker cover. The test specimen, mounted in a holder (acrylic for normal oils, PTFE for synthetic fluids) is submerged in the sample in the beaker and supported by the beaker cover. A hinged front panel allows visual check to be made of sample mixing while the beakers are immersed in the bath. Supplied with: seven standard stirrers and beakers.
    Yes! I am Interested

    Grease Cone Penetrometer

    REQUEST CALLBACK

    Grease Cone Penetrometer
    • Grease Cone Penetrometer
    • Grease Cone Penetrometer
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.05 Lakh / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    MaterialMild Steel
    Automation GradeAutomatic
    Usage/ApplicationGREASE
    ColorWhite
    FinishingFINE
    Weight20 KG
    BrandDM
    Frequency50 HZ
    Display TypeDIGITAL
    Country of OriginMade in India

    Automaetic Grease cone penetrometer 

    AS PER ASTM D 217


    The  cone penetrometer is defined as  an instruments  which is used to determine theconsisetency  or hardness of lubricating grease  by measuring the penetration of conein tenths of milimeter.the term penetration is define as the depth at  which standard cone enters the grease sample  when released to fallunder its own weightfor 5 second .

     

    ·       Applicable Standard : ASTM D217-02

    ·       Penetration range = 0 -400mm

    ·       Division = 1/10mm

    ·       Smooth and polished surface Cone = Brass

    ·       Approximate mass of Cone = 102.50 grams

    ·       Cone tip = Stainless Steel

     

    ·       Base plate with Levelling screw and spirit Level indication

     

    ·       Standard Plunger for accurate penetration

    ·       2 Container for sample preparation

     

    ·          Height adjustment knob for Cone position

     

        digital timer with magnetic Flux mechanism for accurate 5 seconds release timer 

    Additional Information:

  • Item Code: 500
  • Production Capacity: 1 /MONTH
  • Delivery Time: 1 MONTH
  • Yes! I am Interested

    Gum Content In Fuel By Jet Evaporation

    REQUEST CALLBACK

    Gum Content In Fuel By Jet Evaporation
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / NumberGet Latest Price

    Product Details:
    Insulation WallDouble Wall
    MaterialStainless Steel
    Automation GradeAutomatic
    BrandDM
    Voltage230 V
    Power6 KW
    Temperature250C
    Pressure Range2 KG
    Temperature Range130C

    Gum Content In Fuel By Jet Evaporation :with supper heater and stam generatorfully s.s bofy and aluminium block
    Yes! I am Interested

    Cone Penetrometer For Grease

    REQUEST CALLBACK

    Cone Penetrometer For Grease
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.05 Lakh / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    MaterialMild Steel
    Automation GradeAutomatic
    Usage/ApplicationGREASE
    ColorWhite
    FinishingFINE
    Weight20 KG
    BrandDM
    Frequency50 HZ
    Country of OriginMade in India

    CONE PENETRATION

     FULLY AUTOMETIC: IP 50  ASTM D217 

    The  cone penetrometer is defined as  an instruments  which is used to determine theconsisetency  or hardness of lubricating grease  by measuring the penetration of conein tenths of milimeter.the term penetration is define as the depth at  which standard cone enters the grease sample  when released to fallunder its own weightfor 5 second .

     

    ·       Applicable Standard : ASTM D217-02

    ·       Penetration range = 0 -400mm

    ·       Division = 1/10mm

    ·       Smooth and polished surface Cone = Brass

    ·       Approximate mass of Cone = 102.50 grams

    ·       Cone tip = Stainless Steel

     

    ·       Base plate with Levelling screw and spirit Level indication

     

    ·       Standard Plunger for accurate penetration

    ·       2 Container for sample preparation

       Height adjustment knob for Cone position

        digital timer with magnetic Flux mechanism for accurate 5 seconds release timer 

    Additional Information:

  • Production Capacity: 1 /month
  • Yes! I am Interested

    Air Release Value Test Apparatus Of Lubricating Oil

    REQUEST CALLBACK

    Air Release Value Test Apparatus Of Lubricating Oil
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 3.5 Lakh / PieceGet Latest Price

    Product Details:
    BrandDM
    Voltage230
    Power2 KW
    External Diameter400 MM
    Size15 LTR
    Temperature120C

    SEMI AUTOMETIC  : PID TEMP CONTROLLER 
                                  WHIOUT PLC BASE 
    FULLY AUTOMETIC :  (HMI): FULLY AUTOMETIC , PLC BASE PROGRAMEBLE : 500000
     PARTS : WATER BATH 
                  AIRCOMPRESSURE 
                 GLASSWARE 

    Yes! I am Interested

    Tar Viscometer Apparatus

    REQUEST CALLBACK

    Tar Viscometer Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 19,000 / NumberGet Latest Price

    Product Details:
    Minimum Order Quantity1 Number
    BrandDM
    MaterialStainless Steel
    Usage/ApplicationLaboratory
    Frequency50Hz
    Power SupplyAC(220+-10%)V
    Working Temperature~240.0deg C
    Temperature Controlling+- 0.1deg C

    We are the leading supplier of Tar Viscometer Apparatus made available to our clients at competitive prices.

    Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Jayesh Patel (Owner)
    D M Instruments
    05, Jhanvi Estate, Opposite Madhav Avenue, SP Ring Road, Odhav Circle, KATHWADA
    Ahmedabad - 382415, Gujarat, India
    Call Us: 
    Call Response Rate: 86%
    Share Us :



    Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

    © D M Instruments. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    D M Instruments