Tile-Ceramic Laboratory Equipment

Approx. Rs 63,000 / PieceGet Latest Price

Approx. Rs 50,000 / PieceGet Latest Price

Approx. Rs 65,000 / NumberGet Latest Price

• EN ISO 10545-3, EN ISO 10545-9, IS 13630 (Part-2)

• For water absorption test and bulk density test of ceramic tiles. The tiles will be placed vertically in the slots provided to conduct the water absorptions characteristic test.

• High speed stirrer to maintain uniform temperature distribution
• Immersion heater to achieve the set point temperature
• Accommodate test specimen up to 600 x 600 mm size with special S.S. Stand
• Unique arrangement to place tiles vertically with no contact between them.

Approx. Rs 2.5 Lakh / NumberGet Latest Price

Approx. Rs 1,200 / PieceGet Latest Price

• IS 101, BS EN ISO 2811

• To determine specific gravity or density of paints
• To determine specific gravity or density of coatings
• To determine specific gravity or density of lacquer, pastes, semi-pastes, and other liquid or semi-liquid materials.

• Pycnometers are used to determine the specific weight per unit volume of a liquid at a given temperature.
• Made from Stainless steel material
• Supplied with top cover (Lid)
• Supplied with calibration certificate

Approx. Rs 2.5 Lakh / NumberGet Latest Price

• For measurement of straightness and squareness
• For measurement of flatness / warpage.
• Tiles size :100  X100  to 600 x 600mm or according to required size of tiles.
• Material of Construction : Mild steel duly blackodized
• Note : The machine is completely made of CNC machine for achieving required accuracy of measurement.

• Make: Baker Or Equivalent,
• Range: 0 To 10Mm
• Qty: 03 Nos

• Material: M.S. (Duly Blackodized),
• Qty: 10 No

• Size: 1.5mm
• Qty: 01 No

• Size: Suitable
• Qty: 03 Nos

• At the time of placing an order, please advice us about your tiles size which are continuously utilized.

• 300 X 300
• 450 X 450
• 600 X 600

• 400 X 400
• 500 X 500
• 600 X 300

Approx. Rs 1 Lakh / NumberGet Latest Price

• OPERATION DEVISE :- Electrically motorize operated forward & reverse action.
• SEESING DEVISE :- Heavy duty S.S Load cell
• STRUCTURE DEVISE :- M.S. Heavy fabrication works.
• INDICATING DEVISE :- LCD Display. Inbuilt Kg. & MOR Reading.
• SPECIAL FEATURE :- Auto calibration, Auto tare, Auto zero tracking & Auto locking facility after material braking.
• SAFETY DEVISE :- Automatic Overload locking facility.
• DISPLAY UNIT :- Kg / cm² & Direct “MOR” Count in Display. (Display Show in Kg. & “MOR” Reading.) (One Time Two Display Reading)
• TEST PROCEDURE :- The modulus of rupture shall be determined by using at least 10 of these bars mounted On supports, 125 mm apart, and loaded rapidly (approximately 5 Kg/s) at themed point.
• EVOLUTION OF RESULT The MODULUS OF RUPTUR ( “ M O R “) modules of Rupture shall be calculated from the formula: ( In belt Two Formula )

Approx. Rs 14,500 / UnitGet Latest Price

• EN ISO 10545-7, ASTM C1027, IS 13630 (Part-11)

• To check the level of abrasion on glazed ceramic tiles.

• Specially designed cabinet in accordance with international standards
• Aesthetic outer appearance
• Adjustable feet with hard rubber bases
• LED Illumination with colour temperature of 6000K

• Lux meter

Approx. Rs 45,000 / NumberGet Latest Price

• EN ISO 10545-7, ASTM C1027, IS 13630 (Part-11)

• To determine the resistance to abrasion on glazing tiles. The ability of glazed tiles to resist surface abrasion, encountered in everyday use, is determined by abrading the glazed surface either with a wet abrasive media or with a dry abrasive media.

• Steel balls of 1mm – 5mm diameter
• Aluminum oxide abrasive powder

• Porcelain cylinders
• Silicon carbide powder

• Distilled water

• Easy to use and with rugged construction
• Electronically controlled RPM Indications
• Mild steel structure body with powder coating paint
• Rotational speed defined and calibrated at 300 RPM
• Strictly abiding to listed international standards

• Dist of center of test area from cent of disc : 195 mm
• Electronic Counter : 4 digits pre-set type electronic counter with memory back up and key-lock reset.

Approx. Rs 35,000 / UnitGet Latest Price

Approx. Rs 1.25 Lakh / NumberGet Latest Price

• EN ISO 10545-5, IS 13630 (Part-14)

• Instrument for the determination of the resistance to the impact of the ceramic tiles. Determination of the coefficient of restitution by dropping a steel ball from a fixed height onto the test specimen and measuring the height of rebound.

• Microphone to measure the rebound number (for fully automatic operation)
• Thermal printer to take on-site readings.

• Electrical Timing Device: To measure the interval between 1st and 2nd impact
• Controller reading: Direct reading in co-efficient of restitution

Approx. Rs 3.5 Lakh / SetGet Latest Price

Approx. Rs 65,000 / NumberGet Latest Price

• IS 1360 part II : 1970

• Consists of accessories such as calorimeter vessel, Water jacket, Offset stirrer, crucible, Fine adjustment valve with built-in pressure gauge, Ignition wire, Palette press, electronic firintg unit and other dedicated accessories etc Microcontroller based
• Automatic measurement and calculation of CALORIFIC VALUE / WATER EQUIVALENT
• JUMBO size 16 x 2 characters LCD display with backlight
• Temperature Indication : 16 x 2 character Digit display
• Temperature Indication range : 0 – 100 °C
• Differential Temperature Range : 0 – 10 °C (Difference in water temp before & after firing the bomb)
• Thermal printer interface for printing the final result
• Automatic detection of temperature rise & fall.
• Automatic operation eliminates the requirement of operator to be continuously
• Weight of tablet feedable through keypad by user.
• Water equivalent settable through keypad by user.
• Automatic alarm on Firing as well as after the test completes.
• Memory storage for data
• Dedicated PC Software

Additional Information:

Approx. Rs 24,000 / NumberGet Latest Price

• LCD with backlight
• Response in 3 seconds
• Linear calibration
• Selectable weighing units and count mode.
• Standard RS232 with PC software(optional¿¿¿
• Fit with inner chargeable DC battery (optional)
• Fit with dual extra display (optional)
• (200 Gram x 1MG)

Approx. Rs 75,000 / NumberGet Latest Price

• EN ISO 10545-6, IS 13630 (Part-12)

• Instrument to determine the resistance to Deep abrasion, by measuring the length of the Groove produced on the specimen surface by a disk that turns at controlled angular speed and makes constant pressure onto the specimen. A controlled feed of abrasive material falls between the disc and specimen.

• Corundum (white fused aluminium) (5 kg)
• Austrian granite for the calibration
• 400 g of lead to modify the weight
• special key for removing the abrasive disk.

• Easy to use and with solid construction
• Electric operation
• Mild steel structure body with powder coating paint
• Electronic control of the disc speed with auto shut-off of the instrument at the achievement of the selected number of revolutions
• Strictly abiding to listed international standards

Approx. Rs 2.5 Lakh / NumberGet Latest Price

• EN ISO 10545-9, ASTM C484, IS 13630 (Part-5)

• To determine the Resistance to thermal shock of Ceramic tiles.

• Designed for cooling ceramic tiles by immersing them in water
• Suitable for sizes of up to 50×50 cm.
• If the glazed tiles are showing an absorption coefficient ≤ 10% (m/m), then they must be immersed in a “Vertical Thermal Tank”
• Fitted with flowmeter to maintain water flow rate of of 4 lt/min
• Fitted with microprocessor based digital controller to maintain temperature of 15 ± 5 °C
• Has sufficient depth to allow the tiles to be placed vertically, immersed and so that are not in contact with each other.
• Water drainage outlet with pipe fitring
• Stainless steel bucket for samples

• Designed for the indirect cooling of ceramic tiles, without immersion
• Suitable for sizes of up to 50×50 cm
• If the glazed tiles are showing an absorption coefficient >10% (m/m), then an operator must use “Horizontal Thermal Tank”.
• Complete stainless steel tank structure
• Aluminum plate of 5 mm thickness is kept inside the tank.
• Flowmeter to maintain 4 lt/min water flow rate
• Microprocessor based digital controller to maintain temperature of 15 ± 5 °C
• Water drainage outlet with pipe fitting
• Stainless steel bucket for samples
• Supplied complete with a 5 kg pack of aluminum granules of different diameters (from 0.3 to 0.6 mm)