Bitumen Testing Equipment

Approx. Rs 900 / NumberGet Latest Price

Additional Information:

Approx. Rs 45,000 / PieceGet Latest Price

Approx. Rs 240 / UnitGet Latest Price

• The ordinary capillary type specific gravity bottle with a neck of 6mm diameter.
• The wide mouthed capillary type specific gravity bottle with a neck of 25mm diameter.
• The ordinary specific gravity bottle is used for materials which remain absolutely fluid at 270C while the wide mouth capillary type is used for materials which remain semisolid of high viscous at 270C.

Approx. Rs 13,500 / UnitGet Latest Price

• The apparatus consists of a cup, heating plate, thermometer clip and test flame attachment with swivel joint for passing over liquid surface in the prescribed manner, heater is controlled by means of Energy Regulator for operation on 230 volts, 50Hz, AC single phase.

Optional Accesories:

• Cleaveland Flash Point Apparatus electric heated with voltage carriac copper coil type.
• Polished carrying wood case.
• Spare cup with handle only.

Approx. Rs 32,500 / UnitGet Latest Price

• Stainless steel bath
• Temperature controller (Thermostatic/Digital)
• Immersion electric heater
• Constant speed Pump cum stirrer
• Carriage holding up to three standard briquette moulds
• Electric motor with gear mechanism
• Stainless steel scale and pointer
• Control Panel

Approx. Rs 50,000 / NumberGet Latest Price

Approx. Rs 40,000 / NumberGet Latest Price

• It is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds. It is fitted with a compaction rammer of 98.5mm dia, weighing 4.535 kg. with a free fall of 457 mm. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal.

Approx. Rs 40,000 / NumberGet Latest Price

We are a recognised name engaged in providing our precious clients with best in class Cooling Bath Circulator. Our offered bath circulators find wide applications in the medical, scientific and other types of laboratories. The offered bath circulators are inspected on diverse parameters, for ensuring their defect free range. We provide these bath circulators on diverse specifications as per the needs of customers.

• PID control, high temperature-controlling accuracy
• Over temperature, alarm protection ensures safety of the unit
• Easy to use, and it can work continuously.

Approx. Rs 30,000 / NumberGet Latest Price

Approx. Rs 40,000 / NumberGet Latest Price

Additional Information:

Approx. Rs 35,000 / UnitGet Latest Price

• The apparatus consist of the following

• A floor standing compression loading frame of 50 KN capacity with motor and worm gear housed within the base unit, producing a platen speed of 50.8mm/min. Limit switches are provided to cut out the platen over run on the downward travel. A handle is provided for manual operation during calibration etc. The load frame is fitted with ON/OFF/Reversing switch and power indicator lamp in front.

• 4”dia X 3” height specimen moulds, base plates and Extension collar. Manufactured from steel.(6“ dia mould can be supplied at extra cost)

• Comprising of a hard wood block with a steel plate, complete with specimen holder, semi circular base and a circular top to hold 4” dia specimen mould in place during compaction of the specimen. (Pedestal to accommodate 6” dia specimen can be supplied at extra cost)

• Designed for use with the compaction pedestal and mould. The hammer has a falling weight of 4.535 kg and free fall of 457 mm.

• Consisting of upper and lower cylindrical segments with provision for fixing flow meter. Suitable to take 4” dia specimens. ( Assembly to accommodate 6” dia specimen can be supplied at extra cost)

• Consisting of a load transfer bar, pressure plate and steel ball

• Proving Ring of 30 KN capacity with calibration certificate with traceability.
• Flow meter Dial Gauge with 0.01mm graduation and 25mm travel.
• Water bath with Thermostatic or Digital Control with stirrer
• Electronic Balance of capacity 5 kg/1gm or 2 kg/0.1 gm or Two Pan Balance
• with set of weights and analytical weight box.
• Pair of Asbestos Gloves
• Filter Paper ( Pack of 100 )
• Misc. items: Spatula, Scoop, Mixing Tray, Trowel, light mineral oil and Benzene.

The following additional Instruments will speed up the testing process with ease and accuracy.

• Allows the marshal sample to be easily removed from the mould. Can also be used for Proctor Moulds and Core cutters.

• The following accessories and consumables are not part of the standard supply and are mandatory for the testing work.
• Automatic Compactor to simulate hand compaction
• Motorised Planetary mixer

Approx. Rs 12,500 / UnitGet Latest Price

Approx. Rs 15,000 / UnitGet Latest Price

• Length of the probe arm from pivot to probe point 244cm.
• Length of measurement arm from pivot to dial 122 cm.
• Distance form pivot to front legs 25cm.
• Distance from pivot to rear legs 166cm and
• Lateral spacing of front support legs 33cm.

The complete instrument is light weight and is supplied in two parts for easy assembling and disassembling on site with help of hand tools and also it becomes easy to carry with the help of handle.

In use one end of the beam rests at a point under investigation while the beam is pivoted at the centre. The free end carries a dial gauge to record the deflections and the other end is kept on the a stable platform. Because of beam ratio small deflection is magnified and recorded on the dial gauge.

In use one end of the beam rests at a point under investigation while the beam is pivoted at the centre. The free end carries a dial gauge to record the deflections and the other end is kept on the a stable platform. Because of beam ratio small deflection is magnified and recorded on the dial gauge